Contact Us 1-800-596-4880

JDBC Transport Reference

The JDBC Transport allows you to send and receive messages with a database using the JDBC protocol. Common usage includes retrieving, inserting, updating, and deleting database records, as well as invoking stored procedures (for example, to create new tables dynamically).

Some features are available only with the Mule Enterprise version of the JDBC transport, which is available with version 1.6 and later of Mule Enterprise. These enterprise-only features are noted below.

Transport Info

Transport Doc Inbound Outbound Request Transactions Streaming Retries MEP’s Default MEP Maven Artifact

JDBC

JavaDoc

check

check

check

check(local,XA)

(error)

check

one-way, request-response

one-way

org.mule.transport:mule-transport-jdbc

Legend

Transport - The name/protocol of the transport
Docs - Links to the JavaDoc and SchemaDoc for the transport
Inbound - Whether the transport can receive inbound events and can be used for an inbound endpoint
Outbound - Whether the transport can produce outbound events and be used with an outbound endpoint
Request - Whether this endpoint can be queried directly with a request call (via MuleClient or the EventContext)
Transactions - Whether transactions are supported by the transport. Transports that support transactions can be configured in either local or distributed two-phase commit (XA) transaction.
Streaming - Whether this transport can process messages that come in on an input stream. This allows for very efficient processing of large data. For more information, see Streaming.
Retry - Whether this transport supports retry policies. Note that all transports can be configured with Retry policies, but only the ones marked here are officially supported by MuleSoft
MEPs - Message Exchange Patterns supported by this transport
Default MEP - The default MEP for endpoints that use this transport that do not explicitly configure a MEP
Maven Artifact - The group name a artifact name for this transport in Maven

Namespace and Syntax

XML namespace (Community version):

xmlns:jdbc="http://www.mulesoft.org/schema/mule/jdbc"

XML namespace (Enterprise version):

xmlns:jdbc="http://www.mulesoft.org/schema/mule/ee/jdbc"

XML schema location (Community version):

http://www.mulesoft.org/schema/mule/jdbc http://www.mulesoft.org/schema/mule/jdbc/3.4/mule-jdbc.xsd

XML schema location (Enterprise version):

http://www.mulesoft.org/schema/mule/ee/jdbc http://www.mulesoft.org/schema/mule/ee/jdbc/3.4/mule-jdbc-ee.xsd">

For Community or Enterprise, if you create the Spring bean right in the Mule configuration file, you must include the following namespaces:

<mule xmlns="http://www.mulesoft.org/schema/mule/core"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:spring="http://www.springframework.org/schema/beans"
       xmlns:jee="http://www.springframework.org/schema/jee"
       xmlns:util="http://www.springframework.org/schema/util"
       xmlns:jdbc="http://www.mulesoft.org/schema/mule/jdbc"
       xsi:schemaLocation="
       http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-current.xsd
       http://www.springframework.org/schema/jee http://www.springframework.org/schema/jee/spring-jee-2.5.xsd
       http://www.springframework.org/schema/util http://www.springframework.org/schema/util/spring-util-2.5.xsd
       http://www.mulesoft.org/schema/mule/core http://www.mulesoft.org/schema/mule/core/3.4/mule.xsd
       http://www.mulesoft.org/schema/mule/jdbc http://www.mulesoft.org/schema/mule/jdbc/3.4/mule-jdbc.xsd">

Connector syntax (Community version):

<spring:bean id="jdbcDataSource" class="org.enhydra.jdbc.standard.StandardDataSource" destroy-method="shutdown">
    <spring:property name="driverName" value="org.apache.derby.jdbc.EmbeddedDriver"/>
    <spring:property name="url" value="jdbc:derby:muleEmbeddedDB;create=true"/>
</spring:bean>

<jdbc:connector name="jdbcConnector" dataSource-ref="jdbcDataSource" pollingFrequency="10000"
                queryRunner-ref="queryRunner" queryTimeout="10" resultSetHandler-ref="resultSetHandler"
                transactionPerMessage="true"/>

Connector syntax (Enterprise version):

<spring:bean id="jdbcDataSource" class="org.enhydra.jdbc.standard.StandardDataSource" destroy-method="shutdown">
    <spring:property name="driverName" value="org.apache.derby.jdbc.EmbeddedDriver"/>
    <spring:property name="url" value="jdbc:derby:muleEmbeddedDB;create=true"/>
</spring:bean>

<jdbc:connector name="jdbcEeConnector" pollingFrequency="1000" dataSource-ref="jdbcDataSource"
                queryRunner-ref="queryRunner" queryTimeout="10" resultSetHandler-ref="resultSetHandler"
                transactionPerMessage="true">
    <jdbc:ackSqlCommandExecutorFactory ref="ackSqlCommandExecutorFactory"/>
    <jdbc:sqlCommandRetryPolicyFactory ref="sqlCommandRetryPolicyFactory"/>
    <jdbc:query key="myQuery" value="select * from table"/>
    <jdbc:sqlCommandExecutorFactory ref="sqlCommandExecutorFactory"></jdbc:sqlCommandExecutorFactory>
    <jdbc:sqlStatementStrategyFactory ref="sqlStatementStrategyFactory"/>
</jdbc:connector>

Endpoint syntax:
Inbound endpoints:
You can define your endpoints 2 different ways:

  1. Prefixed endpoint (valid for both Community and Enterprise JDBC endpoints):

    <jdbc:inbound-endpoint queryKey="selectQuery" name="jdbcInbound" pollingFrequency="10000" queryTimeout="10"
                           connector-ref="jdbcConnector" exchange-pattern="one-way">
        <jdbc:transaction action="ALWAYS_BEGIN" />
    </jdbc:inbound-endpoint>
  2. Non-prefixed URI:

    <inbound-endpoint address="jdbc://getTest?type=1"/>

Outbound endpoints:

  1. Prefixed endpoint (valid for both CE and EE jdbc endpoints):

    <jdbc:outbound-endpoint queryKey="selectCount" exchange-pattern="one-way" connector-ref="jdbcConnector" queryTimeout="10" >
        <jdbc:transaction action="ALWAYS_BEGIN"/>
    </jdbc:outbound-endpoint>
  2. Non-prefixed URI:

    <outbound-endpoint address="jdbc://writeTest?type=2"/>

Considerations

Using the JDBC transport is a good idea if you don’t already have a database abstraction layer defined for your application. It saves you the trouble of writing your own database client code and is more portable if you decide to change databases in the future. If your application uses a database abstraction layer, then it is usually preferable to use that instead of the JDBC transport.

Features

The Mule Enterprise JDBC Transport provides key functionality, performance improvements, transformers, and examples not available in the Mule community release. The following table summarizes the feature differences.

Feature Summary Mule Community Mule Enterprise

Inbound SELECT Queries

Retrieve records using the SQL SELECT statement configured on inbound endpoints.

x

x

Large Dataset Retrieval

Enables retrieval arbitrarily large datasets by consuming records in smaller batches.

x

Acknowledgment Statements

Supports ACK SQL statements that update the source or other table after a record is read.

x

x

Basic Insert/Update/Delete Statements

Individual SQL INSERT, UPDATE, and DELETE queries specified on outbound endpoints. One statement is executed at a time.

x

x

Batch Insert/Update/Delete Statements

Support for JDBC batch INSERT, UPDATE, and DELETE statements, so that many statements can be executed together.

x

Transformers

XML and CSV transformers for easily converting to and from datasets in these common formats.

x

Outbound SELECT Queries

Retrieve records using SQL SELECT statement configured on outbound endpoints. Supports synchronous queries with dynamic runtime parameters.

x

x

Outbound Stored Procedure Support - Basic

Ability to invoke stored procedures on outbound endpoints. Supports IN parameters but not OUT parameters.

x

x

Outbound Stored Procedure Support - Advanced

Same as Basic but includes both IN and OUT parameter support. OUT parameters can be simple data types or cursors

x

Unnamed Queries

Queries that can be invoked programmatically from within components or other Java code. This is the most flexible option, but also requires writing code.

x

x

Flexible Data Source Configuration

Support for configuration of data sources through JNDI, XAPool, or Spring.

x

x

Transactions

Support for transactions via underlying Transaction Manager.

x

x

Within this features section, items identified by the Enterprise marker indicate features available only in the Enterprise version.

Inbound SELECT Queries

Inbound SELECT queries are queries that are executed periodically (according to the pollingFrequency set on the connector).

Here is an example:

<spring:bean id="jdbcDataSource" class="org.enhydra.jdbc.standard.StandardDataSource" destroy-method="shutdown">
    <spring:property name="driverName" value="oracle.jdbc.driver.OracleDriver"/>
    <spring:property name="url" value="jdbc:oracle:thin:user/pass@host:1521:db"/>
</spring:bean>
...
<jdbc:connector name="jdbcConnector" pollingFrequency="10000" dataSource-ref="jdbcDataSource"> ❷
        <jdbc:query key="selectLoadedMules"
                    value="SELECT ID, MULE_NAME, RANCH, COLOR, WEIGHT, AGE from mule_source"/>
</jdbc:connector>
...
    <flow name="AllMules">
        <jdbc:inbound-endpoint queryKey="selectLoadedMules" exchange-pattern="request-response"/> ❶
...
    </flow>
...

In this example, the selectLoadedMules ❶ would be invoked every 10 seconds (pollingFrequency=10000 ms) ❷. Each record from the result set is converted into a Map (consisting of column/value pairs).

Inbound SELECT queries are limited because (1) generally, they cannot be called synchronously (unnamed queries are an exception), and (2) they do not support runtime parameters.

Large Dataset Retrieval

*Enterprise*

Overview

Large dataset retrieval is a strategy for retrieving large datasets by fetching records in smaller, more manageable batches. Mule Enterprise provides the key components and transformers needed to implement a wide range of these strategies.

When To Use It

  • When the dataset to be retrieved is large enough to overwhelm memory and connection resources.

  • When preserving the order of messages is important.

  • When resumable processing is desired (that is, retrieval of the dataset can pick up where it left off, even after service interruption).

  • When load balancing the data retrieval among clustered Mule nodes.

How It Works

Large dataset retrieval does not use conventional inbound SELECT queries to retrieve data. Instead, it uses a Batch Manager component to compute ID ranges for the next batch of records to be retrieved. An outbound SELECT query uses this range to actually fetch the records. The Batch Manager also controls batch processing flow to make sure that it does not process the next batch until the previous batch has finished processing.

Here is an example:

<spring:bean id="idStore" class="com.mulesoft.mule.transport.jdbc.util.IdStore"> ❶
     <spring:property name="fileName" value="/tmp/large-dataset.txt"/>
</spring:bean>
<spring:bean id="seqBatchManager" class="com.mulesoft.mule.transport.jdbc.components.BatchManager"> ❷
    <spring:property name="idStore" ref="idStore"/>
    <spring:property name="batchSize" value="10"/>
    <spring:property name="startingPointForNextBatch" value="0"/>
</spring:bean>
<spring:bean id="noArgsWrapper"
             class="com.mulesoft.mule.transport.jdbc.components.NoArgsWrapper"> ❸
    <spring:property name="batchManager" ref="seqBatchManager"/>
</spring:bean>
<flow name="LargeDataSet">
        <vm:inbound-endpoint exchange-pattern="one-way" path="vm://next.batch"/>
        <spring-object bean="noArgsWrapper" />
...

First, set up the a file to hold the starting point ID for the next batch of records ❶. Next, define your BatchManager and set the idStore, batchSize, and starting point ❷. Then define a 'noArgsWrapper' Spring bean and set a reference to the batch manager ❸. ❹ is where you define the component which is called after the inbound endpoint is triggers. Your outbound endpoints can use:

#[map-payload:lowerId]

And this to reference a batch of database rows:

#[map-payload:upperId]

Important Limitations

Large dataset retrieval requires that:

  1. The source data contains a unique, sequential numeric ID. Records should also be fetched in ascending order with respect to this ID.

  2. There are no large gaps in these IDs (no larger than the configured batch size).

In Combination with Batch Inserts

Combining large dataset retrieval with batch inserts can support simple but powerful ETL use cases.

Acknowledgment (ACK) Statements

ACK statements are optional SQL statements that are paired with inbound SELECT queries. When an inbound SELECT query is invoked by Mule, the ACK statement is invoked for each record returned by the query. Typically, the ACK statement is an UPDATE, INSERT, or DELETE.

An ACK statement would be configured as follows:

...
<jdbc:connector name="jdbcConnector" pollingFrequency="10000" dataSource-ref="jdbcDataSource">
    <jdbc:query key="selectLoadedMules"
                value="SELECT ID, PROCESSED from mule_source WHERE PROCESSED is null order by ID"/>
    <jdbc:query key="selectLoadedMules.ack"
                value="update mule_source set PROCESSED='Y'  where ID = #[map-payload:ID] "/>
</jdbc:connector>
...

Notice the required convention of appending an ".ack" extension to the query name. This convention lets Mule know which inbound SELECT query to pair with the ACK statement.

Also, note that the ACK statement supports parameters. These parameters are bound to any of the column values from the inbound SELECT query (such as #[map-payload:ID] in the case above).

ACK statements are useful when you want an inbound SELECT query to retrieve records from a source table no more than once. Be careful, however, when using ACK statements with larger result sets. As mentioned earlier, an ACK statement gets issued for each record retrieved, and this can be very resource-intensive for even a modest number of records per second (> 100).

Basic Insert/Update/Delete Statements

SQL INSERT, UPDATE, and DELETE statements are specified on outbound endpoints. These statements are typically configured with parameters, which are bound with values passed along to the outbound endpoint from an upstream component.

Basic statements execute just one statement at a time, as opposed to batch statements, which execute multiple statements at a time. Basic statements are appropriate for low-volume record processing (<20 records per second), while batch statements are appropriate for high-volume record processing (thousands of records per second).

Note that Mule processes JDBC statements differently depending upon the format of the data it receives:

  • if the message payload is a collection, Mule uses batch to process the statement

  • if the message payload is not a collection, Mule uses basic to process the statement

For example, if you use a DataMapper to feed an ArrayList into a JDBC endpoint in your application, Mule uses batch and executes your JDBC statement once for every item in the ArrayList that emerged from the DataMapper.

For example, when a message with a java.util.Map payload is sent to a basic insert/update/delete endpoint, the parameters in the statement are bound with corresponding entries in the Map. In the configuration below, if the message contains a Map payload with {ID=1,TYPE=1,DATA=hello,ACK=0}, the following insert is issued: “INSERT INTO TEST (ID,TYPE,DATA,ACK) values (1,1,'hello',0)”.

<jdbc:connector name="jdbcConnector" pollingFrequency="10000" dataSource-ref="jdbcDataSource">
    <jdbc:query key="outboundInsertStatement"
              value="INSERT INTO TEST (ID, TYPE, DATA, ACK) VALUES (#[map-payload:ID],
                    #[map-payload:TYPE],#[map-payload:DATA], #[map-payload:ACK])"/>
</jdbc:connector>
...
<flow name="ExampleFlow">
    <inbound-endpoint address="vm://doInsert"/>
    <jdbc:outbound-endpoint queryKey="outboundInsertStatement"/>
</flow>
...

Batch Insert/Update/Delete Statements

Enterprise

As mentioned above, batch statements represent a significant performance improvement over their basic counterparts. Records can be inserted at a rate of thousands per second with this feature.

Usage of batch INSERT, UPDATE, and DELETE statements is the same as for basic statements, except the payload sent to the VM endpoint should be a List of Maps, instead of just a single Map.

Batch Callable Statements are also supported. Usage is identical to Batch Insert/Update/Delete.

Note that Mule processes JDBC statements differently depending upon the format of the data it receives:

  • if the message payload is a collection, Mule uses batch to process the statement

  • if the message payload is not a collection, Mule uses basic to process the statement

For example, if you use a DataMapper to feed an ArrayList into a JDBC endpoint in your application, Mule uses batch and executes your JDBC statement once for every item in the ArrayList that emerged from the DataMapper.

Enterprise

Common integration use cases involve moving CSV and XML data from files to databases and back. This section describes the transformers that perform these actions. These transformers are available in Mule Enterprise only.

XML-JDBC Transformer

The XML Transformer converts between XML and JDBC-format Maps. The JDBC-format Maps can be used by JDBC outbound endpoints (for select, insert, update, or delete operations).

Transformer Details:

Name Class Input Output

XML → Maps

com.mulesoft.mule.transport.jdbc.transformers.XMLToMapsTransformer

java.lang.String (XML)

java.util.List
(List of Maps. Each Map corresponds to a "record" in the XML.)

Maps → XML

com.mulesoft.mule.transport.jdbc.transformers.MapsToXMLTransformer

java.util.List
(List of Maps. Each Map converts into a "record" in the XML)

java.lang.String (XML)

Also, the XML message payload (passed in or out as a String) must adhere to a particular schema format:

<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
  <xs:element name="table">
    <xs:complexType>
      <xs:sequence>
        <xs:element ref="record"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  <xs:element name="record">
    <xs:complexType>
      <xs:sequence>
        <xs:element maxOccurs="unbounded" ref="field"/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
  <xs:element name="field">
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base="xs:NMTOKEN">
          <xs:attribute name="name" use="required" type="xs:NCName"/>
          <xs:attribute name="type" use="required" type="xs:NCName"/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>
</xs:schema>

Here is an example of a valid XML instance:

<table>
    <record>
    <field name="id" type="java.math.BigDecimal">0</field>
    <field name="name" type="java.lang.String">hello</field>
    </record>
</table>

The transformer converts each "record" element to a Map of column/value pairs using "fields". The collection of Maps is returned in a List.

The following returns any processed rows in XML format when you go to ‘http://localhost:8080/first20’; in your browser:

<jdbc:connector name="jdbcConnector" dataSource-ref="jdbcDataSource">
        <jdbc:query key="selectLoadedMules"
                    value="SELECT ID, PROCESSED from mule_source WHERE PROCESSED is null order by ID"/>
        <jdbc:query key="selectLoadedMules.ack"
          value="update mule_source set PROCESSED='Y'  where ID = #[map-payload:ID]"/>
    </jdbc:connector>

    <jdbc:maps-to-xml-transformer name="XMLResponseTransformer"/>

    <message-properties-transformer name="XMLContentTransformer">
        <add-message-property key="Content-Type" value="text/xml"/>
    </message-properties-transformer>

    <flow name="ReportModel">
            <inbound-endpoint address="http://localhost:8080/first20" responseTransformer-refs="XMLResponseTransformer XMLContentTransformer" exchange-pattern="request-response"/>
            <jdbc:outbound-endpoint queryKey="selectLoadedMules" exchange-pattern="request-response"/>
    </flow>

CSV-JDBC Transformer

The CSV Transformer converts between CSV data and JDBC-format Maps. The JDBC-format Maps can be used by JDBC outbound endpoints (for select, insert, update, or delete operations).

Transformer Details:

Name Class Input Output

CSV → Maps

com.mulesoft.mule.transport.jdbc.transformers.CSVToMapsTransformer

java.lang.String
(CSV data)

java.util.List
(List of Maps. Each Map corresponds to a "record" in the CSV)

Maps → CSV

com.mulesoft.mule.transport.jdbc.transformers.MapsToCSVTransformer

java.util.List
(List of Maps. Each Map converts into a "record" in the CSV)

java.lang.String
(CSV data)

The following table summarizes the properties that can be set on this transformer:

Property Description

delimiter

The delimiter character used in the CSV file. Defaults to comma.

qualifier

The qualifier character used in the CSV file. Used to signify if text contains the delimiter character.Defaults to double quote.

ignoreFirstRecord

Instructs transformer to ignore the first record. Use this if your first row is a list of column names. Defaults to false.

mappingFile

Location of Mapping file. Required. Can either be physical file location or classpath resource name. The DTD format of the Mapping File can be found at: http://flatpack.sourceforge.net/flatpack.dtd. For examples of this format, see http://flatpack.sourceforge.net/documentation/index.html.

This configuration loads a csv file in the 'mule_source' table of a database

<jdbc:connector name="jdbcConnector" dataSource-ref="jdbcDataSource">
    <jdbc:query key="commitLoadedMules"
                value="insert into mule_source
                (ID, MULE_NAME, RANCH, COLOR, WEIGHT, AGE)
                values
                (#[map-payload:ID;int;in], #[map-payload:MULE_NAME], #[map-payload:RANCH], #[map-payload:COLOR], #[map-payload:WEIGHT;int;in], #[map-payload:AGE;int;in])"/>
</jdbc:connector>

<file:connector name="fileConnector" autoDelete="false" pollingFrequency="100000000"/>
<file:endpoint path="/tmp/data" name="get" connector-ref="fileConnector"/>
<custom-transformer name="ObjectToString" class="org.mule.transformer.simple.ObjectToString"/>
<jdbc:csv-to-maps-transformer name="CSV2Maps" delimiter="," mappingFile="/tmp/mules-csv-format.xml" ignoreFirstRecord="true"/>

<flow name="CSVLoader">
    <file:inbound-endpoint ref="get" transformer-refs="ObjectToString CSV2Maps">
        <file:filename-wildcard-filter pattern="*.csv"/>
    </file:inbound-endpoint>
    <echo-component/>
    <jdbc:outbound-endpoint queryKey="commitLoadedMules"/>
</flow>

Outbound SELECT Queries

An inbound SELECT query is invoked on an inbound endpoint according to a specified polling frequency. A major improvement to the inbound SELECT query is the outbound SELECT query, which can be invoked on an outbound endpoint. As a result, the outbound SELECT query can do many things that the inbound SELECT query cannot, such as:

  1. Support synchronous invocation of queries. For example, you can implement the classic use case of a web page that serves content from a database using an HTTP inbound endpoint and an outbound SELECT query endpoint.

  2. Allows parameters so that values can be bound to the query at runtime. This requires that the message contain a Map payload containing key names that match the parameter names. For example, the following configuration could be used to retrieve an outbound SELECT query:

<jdbc:connector name="jdbcConnector" dataSource-ref="jdbcDataSource">
        <jdbc:query key="selectMules"
                    value="select * from mule_source where ID between 0 and #[header:inbound:max]"/>
</jdbc:connector>
<jdbc:maps-to-xml-transformer name="XMLResponseTransformer"/>
<message-properties-transformer name="XMLContentTransformer">
    <add-message-property key="Content-Type" value="text/xml"/>
</message-properties-transformer>
<flow name="ExampleModel">
    <inbound-endpoint address="http://localhost:8080/getMules" exchange-pattern="request-response" responseTransformer-refs="XMLResponseTransformer XMLContentTransformer"/>
    <jdbc:outbound-endpoint queryKey="selectMules" exchange-pattern="request-response"/>
</flow>

In this scenario, if you hit the 'http://localhost:8080/getMules?max=3' URL, then the following query executes:

SELECT * FROM mule_source WHERE ID between 0 and 3

The database rows transform into XML, which appear in your browser.

Outbound Stored Procedure Support - Basic

Stored procedures are supported on outbound endpoints in Mule. Like any other query, stored procedure queries can be listed in the queries map. Following is an example of how stored procedure queries could be defined:

<jdbc:connector name="jdbcConnector" pollingFrequency="10000" dataSource-ref="jdbcDataSource">
    <jdbc:query key="storedProc" value="CALL addField()"/>
</jdbc:connector>

To denote that we are going to execute a stored procedure and not a simple SQL query, we must start off the query by the text CALL followed by the name of the stored procedure.

Parameters to stored procedures can be forwarded by either passing static parameters in the configuration or using the same syntax as for SQL queries (see "Passing in Parameters" below). For example:

<jdbc:query key="storedProc1" value="CALL addFieldWithParams(24)"/>
<jdbc:query key="storedProc2" value="CALL addFieldWithParams(#[map-payload:value])"/>

<flow name="ExampleModel">
    <inbound-endpoint address="http://localhost:8080/get" exchange-pattern="request-response"/>
    <jdbc:outbound-endpoint queryKey="storedProc1" exchange-pattern="request-response"/>
</flow>

<flow name="ExampleModel">
    <inbound-endpoint address="http://localhost:8080/get2" exchange-pattern="request-response"/>
    <jdbc:outbound-endpoint address="jdbc://storedProc2?value=25"/>
</flow>

If you do not want to poll the database, you can write a stored procedure that uses HTTP to start a Mule flow. The stored procedure can be called from an Oracle trigger. If you take this approach, make sure the exchange pattern is 'one-way'. Otherwise, the trigger/transaction won’t commit until the HTTP post returns.

Note that stored procedures are only supported on outbound endpoints. If you want to set up a flow that calls a stored procedure at a regular interval, you can define a Quartz inbound endpoint and then define the stored procedure call in the outbound endpoint. For information on using Quartz to trigger flows, see the following blog post.

Passing in Parameters

To pass in parameter values and get returned values to/from stored procedures or stored functions in Oracle, you declare the parameter name, direction, and type in the JDBC query key/value pairs on JDBC connectors using the following syntax:

Call #[<return parameter name>;<int | float | double | string | resultSet>;<out>] :=
<Oracle package name>.<stored procedure/function name>($PARAM1, $PARAM2, ...)

where $PARAMn is specified using the following syntax:

#[<parameter name>;<int | float | double | string | resultSet>;<in | out | inout>]

For example:

<jdbc:query key="SingleCursor"  value="call MULEPACK.TEST_CURSOR(#[mules;resultSet;out])"/>

This SQL statement calls a stored procedure TEST_CURSOR in the package of MULEPACK, specifying an out parameter whose name is "mules" of type java.sql.ResultSet.

Here is another example:

<jdbc:query key="itcCheckMsgProcessedOrNot"
value="call #[mules;int;out] := ITCPACK.CHECK_IF_MSG_IS_HANDLED_FNC(487568,#[mules1;string;out],
#[mules2;string;out],#[mules3;int;out],#[mules4;string;out])"/>

This SQL statement calls a stored function CHECK_IF_MSG_IS_HANDLED_FNC in the package of ITCPACK, assigning a return value of integer to the parameter whose name is "mules" while specifying other parameters, e.g., parameter "mules2" is a out string parameter.

Stored procedures/functions can only be called on JDBC outbound endpoints. Once the values are returned from the database, they are put in a java.util.HashMap with key/value pairs. The keys are the parameter names, e.g., "mules2", while the values are the Java data values (Integer, String, etc.). This hash map is the payload of MuleMessage either returned to the caller or sent to the next endpoint depending on the Mule configuration.

Outbound Stored Procedure Support - Advanced

Enterprise

Mule Enterprise provides advanced stored procedure support for outbound endpoints beyond what is available in the Mule community release. This section describes the advanced support.

OUT Parameters

In Mule Enterprise, you can execute your stored procedures with out and inout scalar parameters. The syntax for such parameters is:

<jdbc:query key="storedProc1" value="CALL myProc(#[a], #[b;int;inout], #[c;string;out])"/>

You must specify the type of each output parameter (OUT, INOUT) and its data type (int, string, etc.). The result of such stored procedures is a map containing (out parameter name, value) entries.

Oracle Cursor Support

For Oracle databases only, an OUT parameter can return a cursor. The following example shows how this works.

If you want to handle the cursor as a java.sql.ResultSet, see the "cursorOutputAsResultSet" flow below, which uses the "MapLookup" transformer to return the ResultSet.

If you want to handle the cursor by fetching the java.sql.ResultSet to a collection of Map objects, see the "cursorOutputAsMaps" flow below, which uses both the "MapLookup" and "ResultSet2Maps" transformers to achieve this result.

<jdbc:connector name="jdbcConnector" pollingFrequency="1000" cursorTypeConstant="-10"
      dataSource-ref="jdbcDataSource">
    <jdbc:query key="SingleCursor"  value="call TEST_CURSOR(#[mules;resultSet;out])"/>
</jdbc:connector>

<custom-transformer class="org.mule.transformer.simple.MapLookup" name="MapLookup">
    <spring:property name="key" value="mules"/>
</custom-transformer>

<jdbc:resultset-to-maps-transformer name="ResultSet2Maps"/>

<flow name="SPModel">
    <vm:inbound-endpoint path="returns.maps" responseTransformer-refs="ResultSet2Maps MapLookup"/>
    <jdbc:outbound-endpoint queryKey="SingleCursor"/>
</flow>
<flow name="cursorOutputAsResultSet">
    <vm:inbound-endpoint  path="returns.resultset"  responseTransformer-refs="MapLookup"/>
    <jdbc:outbound-endpoint queryKey="SingleCursor"/>
</flow>

In the above example, note that it is also possible to call a function that returns a cursor ref. For example, if TEST_CURSOR2() returns a cursor ref, the following statement could be used to get that cursor as a ResultSet:

<jdbc:query key="SingleCursor"  value="call #[mules;resultSet;out] := TEST_CURSOR2()"/>
Important note on transactions: When calling stored procedures or functions that return cursors (ResultSet), it is recommended that you process the ResultSet within a transaction.

Unnamed Queries

SQL statements can also be executed without configuring queries in the Mule configuration file. For a given endpoint, the query to execute can be specified as the address of the URI.

MuleMessage msg = eventContext.receiveEvent("jdbc://SELECT * FROM TEST", 0);

Flexible Data Source Configuration

You can use any JDBC data source library with the JDBC Connector. The "myDataSource" reference below refers to a DataSource bean created in Spring:

<jdbc:connector name="jdbcConnector" pollingFrequency="10000" dataSource-ref="myDataSource">
        ...
</jdbc:connector>

You can also create a JDBC connection pool so that you don’t create a new connection to the database for each message. You can easily create a pooled data source in Spring using xapool. The following example shows how to create the Spring bean right in the Mule configuration file.

<spring:bean id="pooledDS" class="org.enhydra.jdbc.standard.StandardXADataSource" destroy-method="shutdown">
  <spring:property name="driverName" value="oracle.jdbc.driver.OracleDriver"/>
  <spring:property name="url" value="jdbc:oracle:thin:user/pass@host:1521:db"/>
  <spring:property name="user" value="USER" />
  <spring:property name="password" value="PWD" />
  <spring:property name="minCon" value="10" />
  <spring:property name="maxCon" value="100" />
</spring:bean>

If you need more control over the configuration of the pool, you can use the standard JDBC classes. For example, you could create the following bean in the Spring configuration file (you could also create them in the Mule configuration file by prefixing everything with the Spring namespace):

<bean id="c3p0DataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource" destroy-method="close">
        <property name="driverClass">
            <value>oracle.jdbc.driver.OracleDriver</value>
        </property>
        <property name="jdbcUrl">
            <value>jdbc:oracle:thin:@MyUrl:MySID</value>
        </property>

        <property name="user">
            <value>USER</value>
        </property>
        <property name="password">
            <value>PWD</value>
        </property>

        <property name="properties">
            <props>
                <prop key="c3p0.acquire_increment">5</prop>
                <prop key=" c3p0.idle_test_period">100</prop>
                <prop key="c3p0.max_size">100</prop>
                <prop key="c3p0.max_statements">1</prop>
                <prop key=" c3p0.min_size">10</prop>
                <prop key="user">USER</prop>
                <prop key="password">PWD</prop>
            </props>
        </property>
    </bean>

You could then reference the c3p0DataSource bean in your Mule configuration:

<connector name="C3p0Connector" className="org.mule.providers.jdbc.JdbcConnector">
  <properties>
    <container-property name="dataSource" reference="c3p0DataSource"/>
      <map name="queries">
        <property name="test1" value="select * from Tablel"/>
        <property name="test2" value="call testd(1)"/>
      </map>
  </properties>
</connector>

Or you could call it from your application as follows:

JdbcConnector jdbcConnector = (JdbcConnector) MuleServer.getMuleContext().getRegistry().lookupConnector("C3p0Connector");
ComboPooledDataSource datasource = (ComboPooledDataSource)jdbcConnector.getDataSource();
Connection connection = (Connection)datasource.getConnection();

String query = "select * from Table1"; //any query
Statement stat = connection.createStatement();
ResultSet rs = stat.executeQuery(query);

To retrieve the data source from a JNDI repository, you would configure the connector as follows:

<spring:beans>
  <jee:jndi-lookup id="myDataSource" jndi-name="yourJndiName" environment-ref="yourJndiEnv" />
  <util:map id="jndiEnv">
    <spring:entry key="java.naming.factory.initial" value="yourJndiFactory" />
   </util:map>
</spring:beans>

Transactions

Transactions are supported on JDBC endpoints. See Transaction Management for details.

Usage

Copy your JDBC client jar to the <MULE_HOME>/lib/user directory of your installation.

If you want to include the JDBC transport in your configuration, these are the namespaces you need to define:

<?xml version="1.0" encoding="UTF-8"?>
<mule xmlns="http://www.mulesoft.org/schema/mule/core"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:spring="http://www.springframework.org/schema/beans"
       xmlns:jdbc="http://www.mulesoft.org/schema/mule/jdbc"
       xsi:schemaLocation="
       http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-current.xsd
       http://www.mulesoft.org/schema/mule/core http://www.mulesoft.org/schema/mule/core/3.4/mule.xsd
       http://www.mulesoft.org/schema/mule/jdbc http://www.mulesoft.org/schema/mule/jdbc/3.4/mule-jdbc.xsd">
...

For the enterprise version of the JDBC transport:

<?xml version="1.0" encoding="UTF-8"?>
<mule xmlns="http://www.mulesoft.org/schema/mule/core"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xmlns:spring="http://www.springframework.org/schema/beans"
      xmlns:jdbc="http://www.mulesoft.org/schema/mule/ee/jdbc"
      xsi:schemaLocation="
       http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-current.xsd
       http://www.mulesoft.org/schema/mule/core http://www.mulesoft.org/schema/mule/core/3.4/mule.xsd
       http://www.mulesoft.org/schema/mule/ee/jdbc http://www.mulesoft.org/schema/mule/ee/jdbc/3.4/mule-jdbc-ee.xsd">
...

Then you need to define a connector:

<spring:bean id="jdbcDataSource" class="org.enhydra.jdbc.standard.StandardDataSource" destroy-method="shutdown">
    <spring:property name="driverName" value="org.apache.derby.jdbc.EmbeddedDriver"/>
    <spring:property name="url" value="jdbc:derby:muleEmbeddedDB;create=true"/>
</spring:bean>

<jdbc:connector name="jdbcConnector" dataSource-ref="jdbcDataSource" pollingFrequency="10000"
                queryRunner-ref="queryRunner" queryTimeout="10" resultSetHandler-ref="resultSetHandler"
                transactionPerMessage="true"/>

Finally, you define an inbound or outbound endpoint.

  • Use an inbound endpoint if you want changes to your database to trigger a Mule flow

  • Use an outbound endpoint to make changes to the database data or to return database data to an inbound endpoint, such as using an http endpoint to display database data.

Endpoints look like this:
Inbound endpoints:

<jdbc:inbound-endpoint queryKey="selectQuery" name="jdbcInbound" pollingFrequency="10000" queryTimeout="10"
                       connector-ref="jdbcConnector" exchange-pattern="one-way">
    <jdbc:transaction action="ALWAYS_BEGIN" />
</jdbc:inbound-endpoint>

Outbound endpoints:

<jdbc:outbound-endpoint queryKey="selectCount" exchange-pattern="one-way" connector-ref="jdbcConnector" queryTimeout="10" >
    <jdbc:transaction action="ALWAYS_BEGIN"/>
</jdbc:outbound-endpoint>
If you are using Mule Enterprise edition, then you must use the EE version of the JDBC transport. Therefore, if you are migrating from CE to EE, update the namespace and schemaLocation declarations to the EE versions as described above.

Exchange Patterns

one-way and request-response exchange patterns are supported. If an exchange pattern is not defined, 'one-way' is the default.

Polling Transport

The inbound endpoint for JDBC transport uses polling to look for new data. The default is to check every second, but it can be changed via the 'pollingFrequency' attribute on the connector.

Features Supported by this Module

Most standard transport features are supported for the jdbc transport: transactions, retry, expressions, etc. Streaming is not supported for the JDBC transport.

Example Configurations

The following example demonstrates how you would write rows in a database to their own files.

Writing database rows to their own files

<?xml version="1.0" encoding="UTF-8"?>
<mule xmlns="http://www.mulesoft.org/schema/mule/core"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:spring="http://www.springframework.org/schema/beans"
       xmlns:jdbc="http://www.mulesoft.org/schema/mule/jdbc"
       xmlns:file="http://www.mulesoft.org/schema/mule/file"
       xsi:schemaLocation="
       http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-current.xsd
       http://www.mulesoft.org/schema/mule/core http://www.mulesoft.org/schema/mule/core/3.4/mule.xsd
       http://www.mulesoft.org/schema/mule/file http://www.mulesoft.org/schema/mule/file/3.4/mule-file.xsd
       http://www.mulesoft.org/schema/mule/jdbc http://www.mulesoft.org/schema/mule/jdbc/3.4/mule-jdbc.xsd">

    <!-- This placeholder bean lets you import the properties from the db.properties file. -->
    <spring:bean id="property-placeholder" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer"> ❶
        <spring:property name="location" value="classpath:db.properties"/>
    </spring:bean>

    <!-- This data source is used to connect to the database using the values loaded from the properties file -->
    <spring:bean id="jdbcDataSource"
        class="org.enhydra.jdbc.standard.StandardDataSource"
        destroy-method="shutdown">
        <spring:property name="driverName" value="${database.driver}"/> ❷
        <spring:property name="url" value="${database.connection}"/> ❸
    </spring:bean>

    <jdbc:connector name="jdbcConnector" dataSource-ref="jdbcDataSource" pollingFrequency="5000" transactionPerMessage="false"> ❹
        <jdbc:query key="read" value="SELECT id, type, data FROM test3 WHERE type=1"/> ❺
        <jdbc:query key="read.ack" value="UPDATE test3 SET type=2 WHERE id=#[map-payload:id]"/> ❻
    </jdbc:connector>

    <file:connector name="output" outputAppend="true" outputPattern="#[function:datestamp].txt" /> ❼

    <flow name="allDbRows">
        <jdbc:inbound-endpoint queryKey="read" connector-ref="jdbcConnector"/> ❽
        <object-to-string-transformer /> ❾
        <file:outbound-endpoint connector-ref="output" path="/tmp/rows"/> ❿
    </flow>
</mule>

The database authentication information is stored in a properties file named 'db.properties' ❶. For a MySQL database, the file would look similar to this:
database.driver=com.mysql.jdbc.Driver
database.connection=jdbc:mysql://localhost/test?user=<user>&password=<password>

The values in the property file are used in ❷ and ❸ to configure the data source bean. The JDBC connector references the data source ❹ and defines a couple of queries (❺ and ❻) which the inbound endpoint uses. The 'read' query checks the database for rows which have a 'type' column set to 1. The 'read.ack' query is automatically run for every new record found and sets the 'type' column to 2 so it is not picked up again by the indound endpoint. A file connector is defined at ❼ to write each row found to a file with a date stamp name. Next, the flow is defined which calls the JDBC 'read' query on the inbound endpoint ❽. New database rows are then processed by the object-to-string transformer ❾ and finally written to the '/tmp/rows' directory ❿.

This example shows how to display database rows in a browser:

Display database rows in a browser

<?xml version="1.0" encoding="UTF-8"?>
<mule xmlns="http://www.mulesoft.org/schema/mule/core"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:spring="http://www.springframework.org/schema/beans"
       xmlns:jdbc="http://www.mulesoft.org/schema/mule/ee/jdbc"
       xmlns:file="http://www.mulesoft.org/schema/mule/file"
       xsi:schemaLocation="
       http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-current.xsd
       http://www.mulesoft.org/schema/mule/core http://www.mulesoft.org/schema/mule/core/3.4/mule.xsd
       http://www.mulesoft.org/schema/mule/file http://www.mulesoft.org/schema/mule/file/3.4/mule-file.xsd
       http://www.mulesoft.org/schema/mule/ee/jdbc http://www.mulesoft.org/schema/mule/ee/jdbc/3.4/mule-jdbc-ee.xsd">

    <!-- This placeholder bean lets you import the properties from the db.properties file. -->
    <spring:bean id="property-placeholder" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer">
        <spring:property name="location" value="classpath:db.properties"/>
    </spring:bean>

    <!-- This data source is used to connect to the database using the values loaded from the properties file -->
    <spring:bean id="jdbcDataSource"
        class="org.enhydra.jdbc.standard.StandardDataSource"
        destroy-method="shutdown">
        <spring:property name="driverName" value="${database.driver}"/>
        <spring:property name="url" value="${database.connection}"/>
    </spring:bean>
    <jdbc:connector name="jdbcConnector" dataSource-ref="jdbcDataSource">
        <jdbc:query key="selectRows"
                    value="select * from mule_source where ID between 0 and #[header:inbound:max]"/> ❶
    </jdbc:connector>
    <jdbc:maps-to-xml-transformer name="XMLResponseTransforer"/> ❷
    <message-properties-transformer name="XMLContentTransformer"> ❸
        <add-message-property key="Content-Type" value="text/xml"/>
    </message-properties-transformer>
    <flow name="ExampleModel">
        <inbound-endpoint address="http://localhost:8080/rows" exchange-pattern="request-response" responseTransformer-refs="XMLResponseTransformer XMLContentTransformer"/> ❹
        <jdbc:outbound-endpoint queryKey="selectRows" exchange-pattern="request-response"/> ❺
    </flow>
</mule>

This example requires Mule Enterprise to run. ❶ defines a select database query using the 'max' parameter which are passed in the requesting URL. We define some transformers at ❷ and ❸ to turn the database row into XML and set the correct Content-type for the browser to display it correctly. ❹ declares the HTTP inbound endpoint with a URL of ‘http://localhost:8080/rows’;. Since we are using an inbound parameter in the select query, we also need to include the 'max' parameter on the requesting URL, such as http://localhost:8080/rows?max=5. ❺ is where the JDBC outbound endpoint calls the 'selectRows' query after the HTTP endpoint triggers.

Configuration Reference

Community

Connector

Attributes of <connector…​>

Name Type Required Default Description

handleOutputResultSets

boolean

no

false

Whether the output java.sql.ResultSet instances should be handled with the ResultSetHandler object. This attribute is useful when executing store procedures which return java.sql.ResultSet instances as output parameters. Default is false.

Child Elements of <connector…​>

Name Cardinality Description

sqlCommandExecutorFactory

0..1

The factory that creates the command executor for the read SQL statement.

ackSqlCommandExecutorFactory

0..1

The factory that creates the command executor for the acknowledge SQL statement.

sqlCommandRetryPolicyFactory

0..1

The factory that creates the retry policies which decide if a SQL statements must be re executed in case of errors.

Inbound endpoint

Child Elements of <inbound-endpoint…​>

Name Cardinality Description

Outbound endpoint

Child Elements of <outbound-endpoint…​>

Name Cardinality Description

Enterprise

Connector

Attributes of <connector…​>

Name Type Required Default Description

handleOutputResultSets

boolean

no

false

Whether the output java.sql.ResultSet instances should be handled with the ResultSetHandler object. This attribute is useful when executing store procedures which return java.sql.ResultSet instances as output parameters. Default is false.

Child Elements of <connector…​>

Name Cardinality Description

sqlCommandExecutorFactory

0..1

The factory that creates the command executor for the read SQL statement.

ackSqlCommandExecutorFactory

0..1

The factory that creates the command executor for the acknowledge SQL statement.

sqlCommandRetryPolicyFactory

0..1

The factory that creates the retry policies which decide if a SQL statements must be re executed in case of errors.

Inbound endpoint

Child Elements of <inbound-endpoint…​>

Name Cardinality Description

Outbound endpoint

Child Elements of <outbound-endpoint…​>

Name Cardinality Description

Transformers

The following transformers can be found in the enterprise version of the jdbc transport:

Maps to xml transformer

Converts a List of Map objects to XML. The Map List is the same as what you get
from using the default ResultSetHandler. The XML schema format is provided in the documentation.

Child Elements of <maps-to-xml-transformer…​>

Name Cardinality Description

Xml to maps transformer

Converts XML to a List of Map objects. The Map List is the same as what you get from using the default ResultSetHandler. The XML schema format is provided in the documentation.

Child Elements of <xml-to-maps-transformer…​>

Name Cardinality Description

Maps to csv transformer

Converts a List of Map objects to a CSV file. The Map List is the same as what you get from using the default ResultSetHandler.

Attributes of <maps-to-csv-transformer…​>

Name Type Required Default Description

delimiter

string

no

Delimiter used in CSV file. Default is comma.

mappingFile

string

no

Name of the "mapping file" used to describe the CSV file. See

for details.

ignoreFirstRecord

boolean

no

Whether to ignore the first record. If the first record is a header, you should ignore it.

qualifier

string

no

The character used to escape text that contains the delimiter.

Child Elements of <maps-to-csv-transformer…​>

Name Cardinality Description

Csv to maps transformer

Converts a CSV file to a List of Map objects. The Map List is the same as what you get from using the default ResultSetHandler.

Attributes of <csv-to-maps-transformer…​>

Name Type Required Default Description

delimiter

string

no

Delimiter used in CSV file. Default is comma.

mappingFile

string

no

Name of the "mapping file" used to describe the CSV file. See

for details.

ignoreFirstRecord

boolean

no

Whether to ignore the first record. If the first record is a header, you should ignore it.

qualifier

string

no

The character used to escape text that contains the delimiter.

Child Elements of <csv-to-maps-transformer…​>

Name Cardinality Description

Resultset to maps transformer

Transforms a java.sql.ResultSet to a List of Map objects just like the default ResultSetHandler. Useful with Oracle stored procedures that return cursors (ResultSets).

Child Elements of <resultset-to-maps-transformer…​>

Name Cardinality Description

Javadoc API Reference

Refer to the EE distribution for the enterprise version of the JDBC transport Javadocs.

Maven

The JDBC transport is implemented by the mule-transport-jdbc module. You can find the source for the JDBC transport under transports/jdbc.

If you are using Maven to build your application, use the following dependency snippet to include the JDBC transport in your project.

Community version:

<dependency>
  <groupId>org.mule.transports</groupId>
  <artifactId>mule-transport-email</artifactId>
  <version>3.4.1</version>
</dependency>

Enterprise version:

<dependency>
    <groupId>com.mulesoft.muleesb.transports</groupId>
    <artifactId>mule-transport-jdbc-ee</artifactId>
    <version>3.4.1</version>
</dependency>

Best Practices

  • Put your database connection and credential information in separate properties file. This allows you to port your configuration file to different environments. See Example Configurations for an example on how this is done.

Data Source Configuration

Data source configuration has become much simpler. Previously, a data source had to be configured with Spring:

<spring:bean id="dataSource" class="org.enhydra.jdbc.standard.StandardDataSource" destroy-method="shutdown">
    <spring:property name="driverName" value="com.mysql.jdbc.Driver"/>
    <spring:property name="url" value="jdbc:mysql://localhost/mule"/>
    <spring:property name="user" value="mysql"/>
    <spring:property name="password" value="secret"/>
</spring:bean>

Now this is greatly simplified:

<jdbc:mysql-data-source name="dataSource" database="mule" user="mysql" password="secret"/>

Data Sources

The following elements can be used with all the database-specific data sources listed below:

Attribute Description

loginTimeout

Login timeout.

transactionIsolation

Transaction isolation level to set on the newly created javax.sql.Connection object.

Derby

Derby data sources are created as embedded data sources. So the definition of user and password is not required.

Tip
Use the jdbc:derby-data-source configuration element to configure Derby. If you use a regular bean, you may receive errors when undeploying or redeploying the application.

Example:

<jdbc:derby-data-source name="dataSource" database="mule"/>

The following attributes are available on the derby-data-source element:

Attribute Description

create

If true, the database is created upon first access. See the Derby documentation for details.

database

Name of the database to connect to. This attribute cannot be used together with the url attribute.

name

Unique identifier of the data source. Use this name to reference the data source from the JDBC connector.

url

JDBC URL to use when connecting to the database. This attribute cannot be used together with the database attribute.

MySQL

Example:

<jdbc:mysql-data-source name="dataSource" database="mule" user="mysql" password="secret"/>

The following attributes are available on the mysql-data-source element:

Attribute Description

database

Name of the database to connect to. This attribute cannot be used together with the url attribute.

host

Database host to connect to. This attribute cannot be used together with the url attribute.

name

Unique identifier of the data source. Use this name to reference the data source from the JDBC connector.

password

Password for connecting to the database. This attribute is required.

port

Database port to connect to. This attribute cannot be used together with the url attribute.

url

JDBC URL to use when connecting to the database. This attribute cannot be used together with the database, host or port attribute.

user

User for connecting to the database. This attribute is required.

Oracle

Example:

<jdbc:oracle-data-source name="dataSource" user="scott" password="tiger"/>

The following attributes are available on the oracle-data-source element:

Attribute Description

host

Database host to connect to. This attribute cannot be used together with the url attribute.

instance

Oracle Instance to connect to. This attribute cannot be used together with the url attribute.

name

Unique identifier of the data source. Use this name to reference the data source from the JDBC connector.

password

Password for connecting to the database. This attribute is required.

port

Database port to connect to. This attribute cannot be used together with the url attribute.

url

JDBC URL to use when connecting to the database. This attribute cannot be used together with the instance, host or port attribute.

user

User for connecting to the database. This attribute is required.

Postgresql

Example:

<jdbc:postgresql-data-source name="dataSource" database="mule" user="postgres" password="secret"/>

The following attributes are available on the mysql-data-source element:

Attribute Description

database

Name of the database to connect to. This attribute cannot be used together with the url attribute.

host

Database host to connect to. This attribute cannot be used together with the url attribute.

name

Unique identifier of the data source. Use this name to reference the data source from the JDBC connector.

password

Password for connecting to the database. This attribute is required.

port

Database port to connect to. This attribute cannot be used together with the url attribute.

url

JDBC URL to use when connecting to the database. This attribute cannot be used together with the database, host or port attribute.

user

User for connecting to the database. This attribute is required.