Contact Us 1-800-596-4880

SAP JCo Extended Properties

You can configure any of the SAP connection properties to the SAP and then use them on the connector or endpoint.

Some of these properties can be configure at connector or endpoint level with specific attributes in the mule-config.xml file.

The keys for these properties should be the same that JCo libraries expect, so please check SAP Client Properties and SAP Server Properties.

<spring:bean name="sapProperties" class="java.util.HashMap">
        <spring:constructor-arg>
            <spring:map>
                <spring:entry key="jco.client.client" value="100"/>
                <spring:entry key="jco.client.user" value="SAP_USER"/>
                <spring:entry key="jco.client.sysnr" value="00"/>
                ...
            </spring:map>
        </spring:constructor-arg>
    </spring:bean>

You can use these properties in the Connector or Endpoint by referencing the map with the attribute jcoClientExtendedProperties-ref:

<sap:connector name="SapConnector" ... jcoClientExtendedProperties-ref="sapProperties"/>
    ...
    <sap:outbound-endpoint connector-ref="sapConnector" ... jcoClientExtendedProperties-ref="sapProperties">

The values configured in this way should be passed directly to the JCo libraries without transformation. So for example, boolean values must be represented by the string "0" (false) or "1" (true).

The properties defined at connector or endpoint level will override the values in the properties map.

Also the properties configured at endpoint level will override the ones from the connector.

SAP Client Properties

These are the properties that can be used inside the Map referenced the attribute jcoClientExtendedProperties-ref at connector, endpoint, inbound-endpoint or outbound-endpoint level.

For an updated and complete list check the javadocs for com.sap.conn.jco.ext.DestinationDataProvider inside your JCo distribution zip file.

SAP Property Description Mule Config Attribute Default Value

jco.client.client

SAP client

jcoClient

jco.client.user

Logon user

jcoUser

jco.client.alias_user

Alias user name

jco.client.passwd

Logon password

jcoPasswd

jco.client.lang

Logon language

jcoLang

jco.client.sysnr

SAP system number

jcoSysnr

jco.client.ashost

SAP application server

jcoAsHost

jco.client.mshost

SAP message server

jco.client.gwhost

Gateway host

jco.client.gwserv

Gateway Service

jco.client.group

Group of SAP application servers

jco.client.tpname

Program ID of external server program

jco.client.tphost

Host of external server program

jco.client.type

Type of remote host 2 = R/2, 3 = R/3, E = External

jco.client.trace

Enable/disable RFC trace (0 or 1)

jcoTrace

jco.client.abap_debug

Enable ABAP debugging 0 or 1

jco.client.use_sapgui

Use remote SAP graphical user interface (0/1/2)

jco.client.getsso2

Get/Don’t get a SSO ticket after logon (1 or 0)

jco.client.mysapsso2

Use the specified SAP Cookie Version 2 as logon ticket

jco.client.x509cert

Use the specified X509 certificate as logon ticket

jco.client.lcheck

Initial codepage in SAP notation

jco.client.grt_data

Additional data for GUI

jco.client.use_guihost

Host to which to redirect the remote GUI

jco.client.use_guiserv

Service to which to redirect of the remote GUI

jco.client.use_guiprogid

Program ID of the server which starts the remote GUI

jco.client.snc_mode

Secure network connection (SNC) mode, 0 or 1

jco.client.snc_partnername

SNC partner, e.g. p:CN=R3, O=XYZ-INC, C=EN

jco.client.snc_qop

SNC level of security, 1 to 9

jco.client.snc_myname

SNC name. Overrides default SNC partner

jco.client.snc_lib

Path to library which provides SNC service

jco.client.dest

R/2 destination

jco.client.saplogon_id

String defined for SAPLOGON on 32-bit Windows

jco.client.extiddata

Data for external authentication (PAS)

jco.client.extidtype

Type of external authentication (PAS)

jco.client.idle_timeout

Idle timeout (in seconds) for the connection after which it will be closed by R/3. Only positive values are allowed.

jcoIdleTimeout

jco.client.dsr

Enable/Disable dsr support (0 or 1)

jco.client.deny_initial_password

deny usage of initial passwords (0default or 1)

jco.destination.peak_limit

Maximum number of active connections that can be created for a destination simultaneously

jcoPeakLimit

jco.destination.pool_capacity

Maximum number of idle connections kept open by the destination. A value of 0 has the effect that there is no connection pooling.

jcoPoolCapacity

jco.destination.expiration_time

Time in ms after that the connections hold by the internal pool can be closed

jco.destination.expiration_check_period

Interval in ms with which the timeout checker thread checks the connections in the pool for expiration

jco.destination.max_get_client_time

Max time in ms to wait for a connection, if the max allowed number of connections is allocated by the application

jco.destination.repository_destination

Specifies which destination should be used as repository, i.e. use this destination’s repository

jco.destination.repository.user

Optional: If repository destination is not set, and this property is set, it will be used as user for repository calls. This allows using a different user for repository lookups

jco.destination.repository.passwd

The password for a repository user. Mandatory, if a repository user should be used.

jco.destination.repository.snc_mode

Optional: If SNC is used for this destination, it is possible to turn it off for repository connections, if this property is set to 0. Defaults to the value of jco.client.snc_mode

jco.destination.one_roundtrip_repository

1 force usage of RFC_METADTA_GET in SAP Server, 0 deactivate it. If not set the destination will made initially a remote call to check if RFC_METADATA_GET is available.

SAP Server Properties

These are the properties that can be used inside the Map referenced the attribute jcoServerExtendedProperties-ref at inbound-endpoint level.

<sap:outbound-endpoint connector-ref="sapConnector" ... jcoServerExtendedProperties-ref="sapServerProperties">

For an updated and complete list check the javadocs for com.sap.conn.jco.ext.ServerDataProvider inside your Jco distribution.

SAP Property Description Mule Config Attribute Default Value

jco.server.gwhost *

Gateway host on which the server should be registered

jcoGwHost

jco.server.gwserv *

Gateway service, i.e. the port on which a registration can be done

jcoGwService

jco.server.progid *

The program ID with which the registration is done

jcoProgId

jco.server.connection_count *

The number of connections that should be registered at the gateway

jcoConnectionCount

2

jco.server.saprouter

SAP router string to use for a system protected by a firewall

jco.server.max_startup_delay

The maximum time (in seconds) between two startup attempts in case of failures

jco.server.repository_destination

Client destination from which to obtain the repository

jco.server.repository_map

repository map, if more than one repository should be used by JCoServer

jco.server.trace

Enable/disable RFC trace (0 or 1)

jco.server.worker_thread_count

set the number of threads that can be used by the JCoServer instance

jco.server.worker_thread_min_count

set the number of threads always kept running by JCoServer

jco.server.snc_mode **

Secure network connection (SNC) mode, 0 (off) or 1 (on)

jco.server.snc_qop **

SNC level of security, 1 to 9

jco.server.snc_myname **

SNC name of your server. Overrides the default SNC name. Typically something like p:CN=JCoServer, O=ACompany, C=EN

jco.server.snc_lib **

Path to library which provides SNC service.

* optional parameters

** SNC parameters (only required if snc mode is on)